1. Definition and purpose
This standard is applicable to hollow blow-molded containers produced with polyethylene as raw material and multi-control point fully automatic unit, which can be used as packaging for general, food, chemical and dangerous goods.
May 18, 2021
Solid-liquid dual-purpose plastic bucket
Nominal/full mouth capacity (L)
Minimum wall thickness（mm）
Wall thickness ratio of symmetrical parts:
Drum lid/sealing lid/sealing lid
black White Red
Weight / grams)：
Tension ring / seal ring
Galvanized / Natural rubber
Weight / grams)：
1050±10 / 100±5
-18℃，0.8m No rupture when dropped
Pack water with nominal capacity, stack 3 high, temperature 40℃,
Time 28 days, no collapse, no leakag
Liquid seal test
Install the nominal capacity of water, placed horizontally at a distance of 5 meters from the ground
Roll back and forth twice within 20 minutes, no leakage
No more than 5 bubbles, no more than 2mm in bubble diameter, no more than 200mm in bubble distance, not at the mouth and bottom of the barrel.
Black spot impurities
The length is not more than 4mm, does not penetrate the wall of the barrel, and is distributed
Not more than 3% of the surface area.
三．Packaging, transportation, storage
The packaging can be determined according to customer requirements; during transportation, you should avoid falling and avoid collision with hard objects; the storage period of the barrel is 2 years from the date of production.
1. 200L barrel double-color barrel design, white inside barrel, white outside barrel, to meet the needs of higher cleanliness.
2. Polymer polyethylene TR571 is made with high strength, good toughness and excellent drop resistance, which meets the packaging requirements of UN dangerous goods.
3. Barrel cap sealing ring can be made of various materials: ethylene propylene trioxide, EVA, etc., with good sealing performance.
4. The product meets the requirements of food-grade packaging. It can also be used for filling general chemical additives and pharmaceutical intermediates.